Innehåll

How to build a gingerbread computer

Introduction
Help guide and Trouble-shouter
Power Supply
DVD and Hard Drive
System fans
System case
Put together
Summary


22/12-05 | Henrik Olsson | milohenke@64bits.se

Print this articlePrint this article



Put together

After much hard work it's now finally time to put the pieces together. We start with gluing the power supply to the back and one of the side-parts. Then we glue all of the parts to the bottom part.

We carefully place the motherboard, equipped with several different components, in the case and put both graphics cards in place on the PCIe-ports. When everything is set, we connect the motherboard and graphics cards to the power supply.

Now when the power wires are connected it's time to glue the other side part and the front. All parts of the computer are now in place! The only thing left is to connect the remaining wires and SATA-cables for the DVD-player and HDD. Take a closer look at the picture to the bottom left to see the result of all hard work.

At the very end, we connect the top part of the case. For those of you who want to be able to open the lid of your gingerbread PC, the computer should be stable enough for just letting the top part lie on top without any other precautions. The gingerbread PC is now complete!


« Previous page Next page »


22/12-05 | Henrik Olsson | milohenke@64bits.se

Print this articlePrint this article



Diskutera denna artikeln i vårt forum!